19 -- POLYETHELYENE DOCK COMPONENTS

Notice Date

March 7, 2001

Contracting Office

Regional Contracting Department (Code 201), Fleet and Industrial Supply Center, 1942 Gaffney Street, Ste 100, Pearl Harbor, HI 96860-4549

ZIP Code

96860-4549

Solicitation Number

N00604-01-T-A322

Response Due

March 9, 2001

Point of Contact

Mary McFeely, Contracting Officer/Contract Specialist

E-Mail Address

Contracting Officer/Contract Specialist (mary_k_mcfeely@pearl.fisc.navy.mil)

Description

This revises the original synopsis posted on 3/1/2001. The following information is provided and added to the specification for the docks: A minimum of 50 each cleats shall be provided for the docks. Contractors shall include three each aluminum brows (gangplanks) with their quotes. Brows shall be a minimum of fourteen feet in length. Any couplers, assembly hardware, mounting brackets (stiff arms) shall be stainless steel. Water depth for end of finger docks is normally no more than thirty-five feet. Docks shall be exposed to approximately one foot wave action. The bottom consists of mud and soot and stability is unknown. A dead weight method for anchoring piers is preferred. If the dead weight method is used, Government shall provide chains and dead weights to anchor piers. Contractor shall provide any dock attachments or components required to anchor the piers. The main dock shall be attached to a concrete quaywall. Contractor shall provide all necessary hardware for attachment to the concrete wall. The contractor shall provide a minimum of four connection points to the wall for anchoring the main dock.

Record

Loren Data Corp. 20010309/19SOL001.HTM (W-066 SN50F5T2)