61 -- SOLE SOURCE -- LOCKHEED MARTIN CONTROL SYSTEMS -- CABLE ASSEMBLY,

Notice Date

March 7, 2001

Contracting Office

Department of the Air Force, Air Force Materiel Command, OC-ALC -- (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015

ZIP Code

73145-3015

Solicitation Number

F34601-01-Q-0048

Response Due

April 26, 2001

Point of Contact

Rob LaFollette, Contract Specialist, Phone (405) 734-8096, Fax (405) 739-5493, Email robert.lafollette@tinker.af.mil -- John Groth, Contracting Officer, Phone (405) 739-4427, Fax (405) 739-5493, Email

E-Mail Address

Rob LaFollette (robert.lafollette@tinker.af.mil)

Description

Presolicitation Notice Date Submitted: 06-MAR-2001 OC-ALC/LPDPB DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 2AE1/106C TINKER AIR FORCE BASE OK 73145-3032 61 -- CABLE ASSEMBLY,SPEC SOL F34601-01-Q-0048 DUE 042601 Rob Lafollette/Lpdpb/[405]734-8096, For additional information contact Rob Lafollette/Lpdpb/[405]734-8096 Item 0001 NSN 6150-01-420-0659PR P/N: 101E1460G7, The item description of the wire harness assy is a special purpose l-shaped Circuit board with attaching electrical wiring and connectors. 12 each con- nnected to 2 each smaller circuit boards. The function of the wiring harness is to assemble the digital electronic control which controls all variable engine parameters and provides engine monitoring and data acquisition and bid direction data communications with the airframe and ground support equip- ment. The dimensions are 14 inches in length and 11 inches in width. The material consists of electric wiring -- mic-c-27500 elect wire -- mil-w-22759/32, Mil-w-22759/33, mil-c-27500, splice, shield mil-s-38519/2/1, insulation slvg, Mil-i-23053/8, contact mil-c-39209/4/5, and aluminum and fiber board. 14EA. Applicable to: F110-129 Engine. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 31 Jul 2001 14 ea Item 0002 NSN 6150-01-420-0659PR Cable Assembly,Spec P/N: 101E1460G7, The item description of the wire harness assy is a special purpose l-shaped Circuit board with attaching electrical wiring and connectors. 12 each con- nnected to 2 each smaller circuit boards. The function of the wiring harness is to assemble the digital electronic control which controls all variable engine parameters and provides engine monitoring and data acquisition and bid direction data communications with the airframe and ground support equip- ment. The dimensions are 14 inches in length and 11 inches in width. The material consists of electric wiring -- mic-c-27500 elect wire -- mil-w-22759/32, Mil-w-22759/33, mil-c-27500, splice, shield mil-s-38519/2/1, insulation slvg, Mil-i-23053/8, contact mil-c-39209/4/5, and aluminum and fiber board. 5EA. Applicable to: F110-129 Engine. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 31 Oct 2001 5 ea Item 0003 NSN 6150-01-420-0659PR Cable Assembly,Spec P/N: 101E1460G7, The item description of the wire harness assy is a special purpose l-shaped Circuit board with attaching electrical wiring and connectors. 12 each con- nnected to 2 each smaller circuit boards. The function of the wiring harness is to assemble the digital electronic control which controls all variable engine parameters and provides engine monitoring and data acquisition and bid direction data communications with the airframe and ground support equip- ment. The dimensions are 14 inches in length and 11 inches in width. The material consists of electric wiring -- mic-c-27500 elect wire -- mil-w-22759/32, Mil-w-22759/33, mil-c-27500, splice, shield mil-s-38519/2/1, insulation slvg, Mil-i-23053/8, contact mil-c-39209/4/5, and aluminum and fiber board. 3EA. Applicable to: F110-129 Engine. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: 28 Jun 2002 3 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) 0001 The approximate issue/response date will be 27 MAR 2001. Written procedure will be used for this solicitation. To: Lockheed Martin Corp, Johnson City Ny 13790-1888. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-3656. Note: This acquisition will be competed IAW the Depot Maintenance Competition Program as prescribed by Public Law 102.396, Section 9095. This acquisition is open to all interested parties including U.S. Department of Defense sources who submit a bid or proposal and compete for this requirement. Request for Written Quotation will be issued. The anticipated award date will be 60 days after the issuance of this notice. See Note (s) 26.

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/cgi-bin/WebObjects/EPS.woa/wa/SPF?A=P&P=F34601-01-Q-0048&L=902)

Record

Loren Data Corp. 20010309/61SOL006.HTM (I-066 SN50F583)