80 -- COATING SYSTEM

Notice Date

March 26, 2001

Contracting Office

General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131

ZIP Code

64131

E-Mail Address

Dixie Logsdon (dixie.logsdon@gsa.gov)

Description

8010-01-397-3806 UI: KT 8 ORDERS QUANTITIES: 1,100,24,30,6,6,40,AND 1 TOTAL QTY: 208 COATING SYSTEM, NON-SKID, FOR ROLL OR SPRAY APPLICATION: DESCRIPTION In accordance with Military Specification MIL-C-24667A(NAVY) dated August 14, 1992. QPL QUALIFICATION REQUIRED. QPL-24667-16, dated February 25, 1998. Type: II -- Standard durability, rollable or trowelable deck coating. Composition: G -- General use abrasive deck coating (Types I, II, III and IV). Color: DARK GRAY Color in accordance with FED-STD-595B color number: 36076 A kit consisting of base material marked component A and curing agent marked component B. When component A is mixed with component B, the amount of material produced shall equal 19 liters (5 gallons). Four liter and 19 liters cans shall be be provided with a bail type handle in accordance with normal commercial practice. Shelf Life: 12 months Age on delivery shall not exceed two months. Section 112 of the Clean Air Act [U.S. EPA National Emissions Standard for Hazardous Air Pollutants -- 40th Code of Regulations 63.780] specifies volatile organic compound and hazardous air pollutant content limits for compliant shipbuilding and ship repair coatings. Successful offeror shall provide the designated contracting officer representative a certificate of compliance as described in the U.S. EPA "Guidebook on How to Comply with the Shipbuilding and Ship Repair (Surface Coating) Operations NESHAP (EPA-453/B-97-001, January 1997, pages E-18, E-32, E-33). [http://www.epa.gov/ttn/uatw/shipb/shipguid.pdf]. This certificate is based either on known coating characteristics, or the results of EPA Method 24 volatile organic compound tests. Certificates need only be generated once for each applicable coating. When, and if, a supplier reformulates a coating, a new certificate would need to be generated. Suppliers are directed to put the following statements on the paint can labels: 1. A certification that paint in the container meets National Emission Standards for Hazardous Air Pollutants (NESHAP) requirements for shipbuilding and ship repair. 2. A statement of the ration of Volatile content to solids expressed as grams VOHAP per liter of solids. THIS IS A QPL ITEM...PLEASE NOTE THE NESHAP REQUIREMENTS ABOVE...PLEASE SPECIFY IF BID IS FOB ORIGIN OR DESTINATION...ALL BIDS MUST BE FAXED OR EMAILED TO DIXIE LOGSDON @ (816)823-2136 AND RECEIVED BY COB 04-05-01. THANK YOU!!!!

Web Link

Visit this URL for the latest information about this (http://www.eps.gov/cgi-bin/WebObjects/EPS.woa/wa/SPF?A=S&P=Reference-Number-8010-01-397-3806&L=7 )

Record

Loren Data Corp. 20010328/SPMSC017.HTM (D-085 SN50H2Y6)