Loren Data Corp.

'

  
COMMERCE BUSINESS DAILY ISSUE OF APRIL 5, 2001 PSA #2823
SOLICITATIONS

95 -- SHEETS OF ALUMINUM ALLOY

Notice Date
April 3, 2001
Contracting Office
Commercial Acquisition Department, Bldg 11, Naval Undersea Warfare Center Division, Newport, Code 59, Simonpietri Dr., Newport, RI 02841-1708
ZIP Code
02841-1708
Solicitation Number
N66604-01-R-3279
Response Due
May 8, 2001
Point of Contact
Lisa Brazil at (401) 832-1437, FAX (401) 832-4820
E-Mail Address
Lisa Brazil (brazillm @npt.nuwc.navy.mil)
Description
CBD Submission No. 50G9U5 dated 22 March 2001 is modified to add the following: The aluminum alloy is an experimental composition for use in a battery. Iron is known to be catalytic to corrosion of the aluminum in this application. That fact drives the requirement for very low iron content. The alloy should start with a very, very low iron content (<<50 ppm) ingot of at least 99.99% pure aluminum. This would allow for a small amount of iron contamination during processing. The tin and magnesium additives are specified over a range. It would be desirable to target the midpoint of each range for production. The composition of the delivered aluminum is re-stated as follows: Magnesium 0.8% to 1.0%, Tin 0.06% to 0.08%, Iron < 50 ppm, Silicon < 50 ppm, Aluminum -- balance. Vendors must supply a chemical analysis from an external laboratory confirming that the aluminum sheet conforms to the chemical limitations. The Government intends to award a firm fixed price contract on a best value basis. Evaluation factors are Past Performance and Price. Delivery will be FOB Destination 30 days after award. NAICS Code 331315, 750 employees. Our department no longer issues solicitations or amendments in paper form. Instead, they may be accessed at our web site http://www.npt.nuwc.navy.mil/contract/. We also provide electronic access in our Bid Room.
Web Link
NAVAL UNDERSEA WARFARE CENTER DIVISION, NEWPORT (http://www.npt.nuwc.navy.mil/contract/)
Record
Loren Data Corp. 20010405/95SOL001.HTM (W-093 SN50I0G8)

95 - Metal Bars, Sheets and Shapes Index  |  Issue Index |
Created on April 3, 2001 by Loren Data Corp. -- info@ld.com