36 -- WIRE BRAIDING MACHINE, REQUEST FOR INFORMATION (RFI)

Notice Date

April 23, 2001

Contracting Office

Naval Air Warfare Center Aircraft Division, Contracts Department, Building 129-2, Highway 547, Lakehurst, NJ 08733-5083

ZIP Code

08733-5083

Solicitation Number

N68335-RFI-4808

Response Due

May 31, 2001

Point of Contact

Jack Murtagh (732) 323-2971

Description

CLASSCOD: 36 SUBJ: 36 -- - WIRE-BRAIDING MACHINE POC: For technical information contact Mr. Robert Hubbard IPT Leader, NAVAIR Lakehurst, Code 4.8.1.7, Phone: (732) 323-1654 or e-mail: HubbardRL@navair.navy.mil. The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ is seeking information from potential sources for Commercial-Off-The-Shelf (COTS) Wire-Braiding Machines (WBM). This activity is conducting market research only. No award is intended as a result of the RFI nor does the Government intend to pay for information received. The WBM is intended to be used by maintenance personnel in U.S. Navy and Marine Corps Intermediate Maintenance Activities (IMA's), 69C and 690 work centers. The WBM shall be a stand-alone, portable, electromechanical device designed to apply textile, wire or composite shielding materials on aircraft wiring harnesses. The WBM shall have been in-use commercially for at least 24 months, and effectively weave and apply (wrap) The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst,NJ is seeking information from potential sources for Commercial-Off-The Shelf (COTS) Wire Braiding Machines (WBM). This activity is conducting market research only. No award is intended as a result of the RFI nor does the Governmnnt intend to pay for information received. The WBM is intended to be used by maintenance personnel in U.S.Navy and Marine Corps Intermediate Maintenance Activities (IMA's),69C and 690 work centers. The WBM shall be a stand-alone, portable, electromechanical device designed to apply textile, wire or composite shielding materials on aircraft wire harnesses. The WBM shall have been in-use commercially for at least 24 months, and effectively waave and apply (wrap) braiding materials on wire harnesses that are primarily inches to inches in diameter (and potentially 1 inches in diameter) by using the Maypole process. The WBM shall consist of new components and sub assemblies capable of duplicating manufacturing equivalent textile, wire or composite braid materials. The WBM shall include all required gauges, controls, connections, and other equipment as necessary to form a complete system. The components of the braiding machine shall be complete so that the installed machine can be used for the function for which it was designed. Two WBMs shall be capable of functioning while co-located in one confined workspace. The work spaces are defined as: a) ashore in a 5-ft (L) by 5-ft (W) by 7-ft (H) work area, and b) Mobile Maintenance Facility (MMF) where the entrance is 48 inches by 76 inches with a work area of 5-ft by 5-ft with a maximum height of 7-ft. All materials used in the construction of the WBM shall provide optimum performance and corrosion resistance. The unit shall have corrosion resistive coatings and be rugged enough to withstand abuse by personnel during normal operations. Cured coatings shall be resistant to abrasion, impact, and degradation from fluids and lubricants likely to be encountered with the equipment. Topcoat and primers shall not contain lead, chromates, or other heavy metals. Respondents to this RFI may provide catalogs, drawings/illustrations, technical manuals, Training description/material, calibration requirements (if any), recommended spare parts list, warranty, life cycle (ten year) technical and parts support, Testing documentation, brochures and/or any other documentation that describes the capability to manufacture and support a wire-braiding machine of the type described in this announcement. The information provided shall address the following criteria, along with supporting documentation where applicable: 1. Critical Parameters: a) Mean Time Between Failure (MTBF), b) Mean Time To Repair (MTTR), c) Performance Test Documentation, d) Dimensions. 2. Technical Documentation: a) Setup and Operation, b) Repair Processes, c) Available Training Media. 3. Delivery Schedules. It is requested that respondents identify Government and/or commercial customers to whom this equipment or similar equipment has been delivered. Provide customer point of contact, including a telephone number, e-mail address or web site, quantities sold along with dates sold, and a description of the unit(s). This announcement is not a formal solicitation and is not a request for proposal. No contract will be awarded from this announcement. No reimbursement will be made of any costs to provide information in response to this announcement or any follow-up information requests. Availability of any formal solicitation will be announced under a separate Commerce Business Daily announcement. This synopsis is for information and planning purposes only and is not to be construed as a commitment by the Government. Each response must reference the "source sought" title. Responses should be sent to Naval Air Warfare Center Aircraft Division, Lakehurst, NJ, Attn: Jack Murtagh, Code 25221, Highway 547, Lakehurst, NJ 08733. Mr Murtagh is the point of contact for this "source sought" notice and can be reached at telephone (732) 323-2901and e-mail address murtaghjL@navair.navy.mil. Responses must be received in writing no later than 31 May 2001 by 4 pm EST.

Record

Loren Data Corp. 20010425/36SOL002.HTM (W-113 SN50J9W1)