34 -- SEAT AND GUIDE MACHINE

Notice Date

August 24, 2001

Contracting Office

United States Marine Corps, Regional Contracting Office, Far East, PSC 557, P.O. Box 2000, FPO AP 96379-2000

ZIP Code

96379-2000

Solicitation Number

M67400-01-T-0783

Response Due

September 6, 2001

Point of Contact

GySgt Wesley McBride, 011-81-6117-45-3727

E-Mail Address

click here to contact teh Procurement Supervisor via (mcbridewa@mcbbutler.usmc.mil)

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This procurement is not a small business set-aside; any responsible source may submit an offer. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Solicitation number M67400-01-T- 0783 applies and is issued as a Request For Quote. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 90-45 and Defense Acquisition Circular 91-11.The standard industrial code is 5084 the business size standard is NTE 5.0 million. The agency need is for: Item 0001: Qty: 1 EA SEAT AND GUIDE MACHINE SGM 1500C W/ACCS. SPECIFICATIONS: FLOOR AREA REQUIRED: 96"L X 57"D X 82"H. ELECTRICAL REQUIREMENTS: 230 OR 208V, SINGLE PHASE, 60/50HZ, 15AMPS. PNEUMATIC REQUIREMENTS: 80 PSI OR 5.5 BAR. SHIPPING WEIGHT: 2800 LBS. ACCS: VALVE SEAT CUTTER KIT SGM505 1ea. VALVE SEAT CUTTER KIT SGM300 1ea, SETTING FIXTURE SGM5020 1ea, DRILL, REAMER & SPOT FACER VGS20956 1ea, VALVE SEAT DRIVER KIT VGS20960 1ea, VALVE GUIDE INSTALLATION KIT VGS20964 1ea, RAPID VALVE SEAT CHECKER VS1005 1ea, TOOL SHARPENER (115V, 60HZ) TS100K 1ea, DRO ASSEMBLY SGM5515 1ea, CUTTER BODY 1.00-1.56" SGM 1025 1ea, CUTTER BODY 1.50-2.50" SGM 1030 1ea, CUTTER KIT SGM700 1ea, VALVE SEAT CUTTER KIT SUNNEN VGS300 1ea, DIGITAL LEVEL KIT SGM6360 1ea, 1 3/8" SPOT FACER VGS345 1ea, PILOTS CP-E 25ea, PILOT TOOL SGM 1100 1ea, PILOT STORAGE KIT SGM5540 1ea, CUTTERS VSI 15ea, EXTENDED COLLET ADAPTER ASSEMBLY SGM1050 1ea, COLLET SET VC200 1ea, 1025 B-HOG HOLDER 70-79 SGM1090 1ea, 1030 B-HOG HOLDER 70-79 SGM1095 1ea, 75 DEGREE BOWL HOG INSERT SGM1075 2ea, 1025 B-HOG HOLDER 80-89 SGM1115 1ea, 1030 B-HOG HOLDER 80-89 SGM1125 1ea, DOWEL PIN PLATES SGM4105 1ea. Manufacturer for the above part numbers is Sunnen Products Company. or equal. Item 0002: Qty: 1 EA HEAD & BLOCK RESURFACER HBS2101D W/ACCS: UNIVERSAL BELT-DRIVEN CUTTER PLATE -ALUMINUMN CAST IRON OR COMBINATION. ELECTRONIC DIGITAL READOUT SCALE SHOWS EXACT VERTICAL POSITION OF CUTTER. SPECIFICATIONS: TABLE AREA: 48" x 14" MAX, WORK AREA: 59" x 13.98" MAX. REAR CLEARANCE (FROM CENTERLINE OF CUTTER) 18". ACCS: CBN INSERT TB917A 1ea, PCD TOOL BIT TB920A 1ea, DIESEL BLOCK FIXTURE HBS1100 1ea, CAT V-BLOCK FIXTURE HBS3305 1ea, DETROIT V-BLOCK FIXTURE HBS3310 1ea. Manufacturer for the above part numbers is Sunnen Products Company. Or equal Item 0003: Qty: 1 EA VERTICAL HONE MACHINE CV616D: A WIDE RANGE OF BORE-FINISHING WORK MACHINE. LOW-COST PRECISION HONING OF 19 mm TO 203 mm BORES IN BIG PIECES. EQUIPMENT HAS THE FOLLOWING ACCESSORIES: HONING OIL (DRUM) MAN84555 1ea,CLAMP KIT CK1200 1ea, STANDARD HONE HEAD CK3000 1ea, SETTING GAGE CK3155A 1ea, STONE INSERTER CK3355A 1ea, STONE SET EHU123 6ea, STONE SET EHU518 6ea, STONE SET JHU623 6ea, STONE SET JHU818 6ea, STORAGE RACK CK3040A 1ea, MASTER HOLDER SET CK3035A 2ea, MASTER HOLDER SET CK3045A 2ea, GUIDE SHOE CK3570 2ea, DIAL BORE GAGE GA2125 1ea, SETTING FIXTURE CF1126 1ea, CHAMFERING CONE AN980 1ea, MASTER HOLDER SET CK3030A 1ea, MB DIAMOND STONE SET CK30DM100 1ea, GEAR SET CK234A 1ea. Manufacturer for the above part numbers is Sunnen Products Company. Or equal DELIVERY: Shall be FOB Destination to Defense Distribution San Joaquin Tracy Depot Bldg 30 CCP, 25600 Chrisman Road, Tracy CA 95376, 30 days after award. SOLICITATION PROVISIONS: The following provisions apply to this acquisition: FAR 52.212-1 Instructions to Offerors-Commercial Items (Oct 2000). FAR 52.212-2 Evaluation-Commercial Items (Jan 1999); the following factors shall be used to evaluate offers: Price and Price Related factors. FAR 52.212-3 Offeror Representations and Certifications Commercial Items (May 2001). FAR 52.212-4 Contract Terms and Conditions Commercial Items and Addenda (May 2001). FAR 52.232-33 Mandatory Information for Electronic Funds Transfer Payment (May 1999). FAR 52.247-34 F.O.B. Destination (Nov 1999). FAR 52.211-6 Brand Name or Equal (Aug 1999). FAR 52.214-21 (May 2001) Descriptive Literature. FAR 52.214-22 (March 1990) Evaluation of Bids for Multiple Awards. FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items (May 2001) apply to this acquisition. Full text of these provisions may be accessed on-line at http://www.arnet.giv or http://farsite.hill.af.mil. All offerors must ensure they are registered in the Central Contractor Registration (CCR) in accordance with DFARS 252.204-7004. CCR is mandatory requirement for all Government contracts. To register on line http://ccr.dlsc.dla.mil. DUNS, TIN and CAGE Code must be written on submitted quote. Payments shall be made electronically by DFAS Yokota, Japan. SUBMISSION OF OFFERS: Offers can be faxed to 011816117450963, send via email to the email address below or mail to the Regional Contracting Office, PSC 557 BOX 2000, FPO AP 96379. Offers must be received no later than 3:00 PM, JST, 6 SEPT 01. Questions may be addressed to GySgt Wesley McBride by email at: mcbridewa@mcbbutler.usmc.mil . All responsible sources may submit a quote that shall be considered. *****

Record

Loren Data Corp. 20010828/34SOL001.HTM (W-236 SN50V8V0)