10 -- HYDRAULIC WHEEL MOTOR FOR THE ARMOR MOVING TARGET CARRIER

Notice Date

September 7, 2001

Contracting Office

US Army Tank -- Automotive and Armaments Command -- Rock Island( TACOM-RI) Attn: AMSTA-CM-CR, Rock Island , IL 61299-7630

ZIP Code

61299-7630

Response Due

September 24, 2001

Point of Contact

POC Contract Specialist: Cheryl J. Mau (309)782-4947, PCO: Debra A. Juhl (309)782-3370

E-Mail Address

Click here to email the contract specialist. (mauc@ria.army.mil)

Description

The U.S. Army , TACOM-RI, IL is seeking sources for Hydraulic Wheel Motor. The requirements of the Hydraulic Wheel Motor are as follows: 1. The Hydraulic Wheel Motor will work in tandem with 3 other Hydraulic Wheel Motors (4 wheel drive) to move the AMTC (Armor Moving Target Carrier), weighing roughly 3800 pounds, and measuring 11 ft. L x 5 ft. W x 2 ft. H, forward and backwards on a 350 meter track than can be curved and/or inclined at no more than 10 degrees. 2. The 4 motors will be capable of accelerating the AMTC to 20+/-2.5 km/h within 40 meters with the specified wind load of 35 MPH and decelerate from 20+/-2.5 km/h to a stop within 40 meters both on a flat terrain (no mechanical braking during deceleration except for the final stop). 3. On a 10 degree slope, the Wheel Motors shall provide enough power to accelerate the AMTC from 0 to 20 km/h within 100 meters. 4. Some of the specifications are: Displacement (in 3/rev): 3.6, Max Speed (RPM) @ 15 GPM 945, Speed (RPM) per GPM 63, Pressure (PSI), Max Continuous 1750, Max Intermittent 2250, Max Torque (In Lbs), @ Max Continuous PSI 881, @ Max Intermittent PSI 1141, Peak Back Pressure (PSI) 1500, Size (In), Body Length (Minus Shaft) 5.00, Body Width 4.50, Shaft Length 2.00, Shaft Dia 1.250/1.249, Keyway .3135/.3125, Ports (2 each) .875-14 UNF-2B, Port (1 each) .437-10 UNF-2B, Mounting Slots (2 each) .534 @ 4.25" OC, 5. Motor must be capable of fitting through an opening measuring 6 inches by 6 inches. 6. Details of the current obsolete motor and the opening shape are at https://aais.ria.army.mil/aais/MARKET_SURVEYS/market.htm 7. If you have/sell Hydraulic Wheel Motors that meet the requirements stated above (with or without modifications), please provide your commercial literature on the product along with prices and any minimum order quantity. Also provide information on discount terms, price breaks, warranties, delivery terms, any testing performed, your small business status, and the requirements of any laws or regulations unique to the item being acquired. 8. Please identify any requirements stated above that you feel are overly restrictive which would either restrict effective competition or prohibit commercial items as defined in FAR 2.101. 9. Funds are not presently available for this potential acquisition. It should be noted that this is NOT a Request for Proposal; the purpose of the sources sought notice is to seek commercial sources that will meet the U.S. Government's requirement.

Web Link

Click here to view details of obsolete motor and opening (https://aais.ria.army.mil/aais/MARKET_SURVEYS/market.htm)

Record

Loren Data Corp. 20010911/10SOL004.HTM (W-250 SN50X0K1)