MODIFICATION
61 -- Generator/UPS/Panel Board/HVAC Replacement & Overhead-Electrical-Power-Line Replacement
- Notice Date
- 6/11/2007
- Notice Type
- Modification
- NAICS
- 237130
— Power and Communication Line and Related Structures Construction
- Contracting Office
- Department of Energy, BWXT Pantex (DOE Contractor), Pantex, PO Box 30020, Amarillo, TX, 79120, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-MJA
- Response Due
- 6/15/2007
- Archive Date
- 6/15/2007
- Point of Contact
- Vanessa Everhart, Small Business Program Manager, Phone 806.477.6549, Fax 806.477.6960, - Vanessa Everhart, Small Business Program Manager, Phone 806.477.6549, Fax 806.477.6960,
- E-Mail Address
-
VEVERHAR@pantex.com, VEVERHAR@pantex.com
- Description
- BWXT Pantex (Pantex), a government-owned, contractor-operated facility located in Amarillo, TX, for the Department of Energy?s National Nuclear Security Administration (NNSA), is preparing a solicitation to provide construction services to upgrade Pantex?s electrical distribution system. The Pantex Plants electrical distribution system is an electrical network that supplies electricity throughout the plant and in outlying areas of the Pantex Plant near Amarillo, Texas. Electricity is a required utility as the Pantex Plant relies on electrical power to perform the essential functions of the Plant. The objective of the EDSU project is to replace approximately 19 miles of overhead power lines (includes the removal of 704 existing poles and installation of 549 new poles) and 1 mile of underground conductors; replace 9 generators and 4 UPS with 4 new generators and 2 UPS; and to replace 12 panel boards and 2 air conditioning units. This project shall provide turnkey Contractor services for Pantex. These services shall be for the equipment / material procurements, construction, start-up testing, plant personnel training, and completion of project closeout documentation (such as submittal of as-built drawing ?mark-ups?) for the EDSU project. The scope of this project consists of two major tasks: (1.) Generator /UPS /Panel board /HVAC Replacement (GUPHR), and (2.) Overhead-Electrical-Power-Line-Replacement (OEPLR). The OEPLR task shall upgrade most of the Plant?s aging overhead electrical power poles. In addition to power poles, lighting poles will also be replaced in several locations. The scope of both tasks includes disconnecting operating facilities and reconnecting power. The successful contractor will be required to submit a cutover strategy plan that identifies how electrical power will be provided to facilities during construction activities and how electrical power will be cut over from the existing system to the new. The new lines shall be installed such that both systems (new & existing) can remain operational independently &/or connected together. The maximum duration for facility outage to perform the actual cutover is limited and will complicate the execution. EXPECTED RFP DATE IS JUNE 18, 2007 EXPECTED AWARD AND START DATE IS SEPTEMBER 30, 2007 ALL QUESTIONS, WHETHER TECHNICAL OR CONTRACTUAL, MUST BE SENT ELECTRONICALLY TO MIKE ALBERS, JALBERS@PANTEX.COM IF YOU WILL BE RESPONDING TO THIS SOLICITATION, YOU MUST SUBMIT AN EMAIL TO JALBERS@PANTEX.COM ACKNOWLEDGING YOUR PARTICIPATION IN THIS SOLICITATION. IF ANY QUESTIONS SHOULD ARISE, YOU WILL BE NOTIFIED ELECTRONICALLY. The purpose of this sources sought notice is to assist Pantex in preparing a list of qualified suppliers to whom to send the formal solicitation. Interested suppliers, after having reviewed this sources sought, should submit to Pantex a statement of qualifications (SOQ), consisting of no more than two (2) pages, that describes the supplier's experience and capabilities in terms of Generator/UPS/Panel board/HVAC Replacement and Overhead Electrical Power Line Replacement of similar systems. Suppliers must submit their SOQs to Mike Albers at jalbers@pantex.com no later than June 15, 2007 FOR PARTIES INTERESTED IN PROPOSING ON THE EDSU PROJECT, PLEASE RESPOND VIA E-MAIL. INCLUDE THE FOLLOWING IN YOUR E-MAIL BY June 15, 2007: 1. Name, address, point of contact 2. e-mail address 3. phone number 4. Two page or less of supplier's experience and capabilities Point of Contact Mike Albers, Contracts Specialist, Email jalbers@pantex.com, Please note that all questions and comments must be in writing via email, no telephone calls. Place of Performance Address: BWXT Pantex plant, Amarillo, TX Postal Code: 79120 Country: UNITED STATES
- Place of Performance
- Address: BWXT Pantex, P. O. Box 30020, Amarillo
- Zip Code: 79120
- Country: UNITED STATES
- Zip Code: 79120
- Record
- SN01315457-W 20070613/070611220234 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |