MOD | 48 | This is the Pre-Solicitation to the previously released Sources Sought for design, furnishing and testing of Motor-Operated Pilot Valve (MOPV) for use aboard U.S. Navy ships.

FBO DAILY ISSUE OF JANUARY 15, 2011 FBO #3339
MODIFICATION

48 -- This is the Pre-Solicitation to the previously released Sources Sought for design, furnishing and testing of Motor-Operated Pilot Valve (MOPV) for use aboard U.S. Navy ships.

Notice Date: 1/13/2011
Notice Type: Modification/Amendment
NAICS: 332912 — Fluid Power Valve and Hose Fitting Manufacturing
Contracting Office: N65540 NAVAL SHIP SYSTEM ENGINEERING STATION, CARDEROCK DIVISION, PA Naval Surface Warfare Center Naval Business Center, Naval Base Philadelphia, PA
ZIP Code: 00000
Solicitation Number: N6554011R5005
Response Due: 2/14/2011
Archive Date: 3/1/2011
Point of Contact: Andrew Lucas 215-897-1232
E-Mail Address: andrew.c.lucas@navy.mil
(andrew.c.lucas@navy.mil)
Small Business Set-Aside: Total Small Business
Description: This synopsis is being posted to both the Federal Business Opportunities (FBO) page located at http://www.fbo.gov and the Navy Electronic Commerce on Line (NECO) site located at https://www.neco.navy.mil/. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the Internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the Naval Surface Warfare Center Carderock Division (NSWCCD). NSWCCD Philadelphia is currently looking for sources that can design, furnish and test motor-operated pilot valve (MOPV) for use aboard U.S. Navy ships. The MOPV will provide two control functions, as a 4-port master MOPV and a 3-port service MOPV. The 4-port master MOPV will be used to initiate AFFF concentrate flow and fire main flow for mixing and disbursement to AFFF systems aboard ship. The 3-port MOPV serves as the local disbursement valve for either fire main flow or the AFFF mixture. The MOPV specified herein shall be a 4-port valve with capability to function as a 3-port valve. The MOPV is subject to the preference for domestic specialty metals, 48 CFR 252.225-7014. Materials used in the construction of the valve, actuator, and associated equipment shall be corrosion resistant materials suitable for use in a seawater environments. The MOPV shall operate under temperatures nominally at 70 °F, but varying between 32 °F and 150 °F. The MOPV shall operate under humidity varying between 0% and 100%, with the expectation of condensation forming in and on the MOPV. The MOPV shall operate with occasional seawater mist or spray directed onto the valve. Operating pressure experienced by valve internals: Nominal range of 150-185 psig and Minimum of 50 psig. The MOPV shall meet MIL SPEC levels for shipboard shock, vibration and EMI.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N00167/N6554011R5005/listing.html)
Place of Performance: Address: 5001 South Broad Street, Philadelphia, PA; Zip Code: 19112
Record: SN02359713-W 20110115/110113234338-6686c2a118b28641f29a680524df5f62 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

48 -- This is the Pre-Solicitation to the previously released Sources Sought for design, furnishing and testing of Motor-Operated Pilot Valve (MOPV) for use aboard U.S. Navy ships.