SOURCES SOUGHT
43 -- CM22033001, 43--Fluid Pressure Filter Parts Kit
- Notice Date
- 2/9/2022 10:55:29 AM
- Notice Type
- Sources Sought
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX-22-R-0064
- Response Due
- 2/16/2022 8:59:00 PM
- Point of Contact
- Eukia Bryant, Phone: 614-692-8997
- E-Mail Address
-
Eukia.Bryant@dla.mil
(Eukia.Bryant@dla.mil)
- Description
- DLA Land and Maritime is preparing to solicit an Indefinite Delivery Contract (IDC) for NSN 4330-01-125-5432 manufactured by Pall Aeropower Corp (18350), part number AA-9718E-25KF1.� This acquisition is for supplies for which the Government does not possess complete and unrestrictive technical data, therefore the Government intends to solicit and contract with only the approved source(s) under the authority of 10 U.S.C. 2304(c)(1). �Alternate offerors will be required to provide a complete data package including data for the approved and alternate part for evaluation to be used on future procurements. �The solicitation is anticipated to require FOB Origin and Inspection and Acceptance at Origin. This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is intended strictly for market research to obtain information regarding the availability and capability of qualified businesses that are capable of executing this potential contract. Your response to the information requested will assist the Government in determining the appropriate acquisition method. The solicitation/request for proposal will be forth coming. An Indefinite Delivery Contract (IDC) with a base period of three (3) years and two (2) option years is anticipated. Option years exercised at the discretion of the Government. �Multiple delivery orders may be written against the basic contract for a maximum of five years. Various incremental quantities will be solicited. �Deliveries may be to various DLA stocking locations. While price will be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors as described in the solicitation. When issued, the Solicitation/Request for Proposal will be listed on the DLA Internet Bid Board System (DIBBS) website at http://dibbs.dscc.dla.mil/rfp/. �Sources interested in offering on this solicitation should complete the attached market survey and return the completed copy to Eukia Bryant at eukia.bryant@dla.mil by February 16, 2022. ----------------------------------- - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:011255432 � � �PARTS KIT, FLUID PRESSURE FILTER. � � �REFERENCE NUMBER:RP001 � � �REFERENCE NUMBER:RA001 � � �REFERENCE NUMBER:RQ011 � � �REFERENCE NUMBER:RQ009 � � �REFERENCE NUMBER:RC001 � � �REFERENCE NUMBER:A0003 � � �REFERENCE NUMBER:ZD080 � � �REFERENCE NUMBER:RD002 � � �REFERENCE NUMBER:CA060 � � �REFERENCE NUMBER:CS187 � � �REFERENCE NUMBER:RQ002 � � �REFERENCE NUMBER:CS241 � � �KIT CONSISTS OF 1 EA �2945-01-125-5432 FILTER ELEMENT, AND 2 EA � � �M83248/1-022 PACKING PREFORM(O-RING). O-RINGS ARE TO BE LIGHTLY � � �LUBRICATED WITH MIL-L-7808 OIL PRIOR TO BEING PLACED AND SEALED IN � � �PLASTIC BAG. END ITEM 2840-01-070-1003, T700-GE-700 � � �REFERENCE NUMBER:ZQA06 � � �CRITICAL APPLICATION ITEM � � �PALL AEROPOWER CORPORATION 18350 P/N AA-9718E-25KF1 � � �PREP FOR DELIVERY � � �LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS � � �PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 � � �QUP:001 �PRES MTHD:ZZ �CLNG/DRY:1 �PRESV MAT:00 � � �WRAP MAT:ZZ �CUSH/DUNN MAT:ZZ �CUSH/DUNN THKNESS:Z � � �UNIT CONT:ZZ �OPI:M � � �PACK CODE:U � � �MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. � � �SPECIAL MARKING CODE:ZZ -ZZ Special Requirements � � �PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING � � � REQUIREMENTS FOR PROCUREMENT � � �REFERENCE NUMBER:ZD037 � � �REFERENCE NUMBER:CS284 ************************************************************************************************************ � � � � � � � � � � � � � � � � � � � � � � � � � � GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT � � �REFERENCE NUMBER RP001 � � �RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT � � �REFERENCE NUMBER RA001 � � �RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. � � �REFERENCE NUMBER RQ011 � � �RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES � � �REFERENCE NUMBER RQ009 � � �RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN � � �REFERENCE NUMBER RC001 � � �RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) � � �REFERENCE NUMBER A0003 � � �MIL-STD-130N(1) DATED 16 NOV 2012. � � �IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY � � �REFERENCE NUMBER ZD080 � � �SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. � � �REFERENCE NUMBER RD002 � � �RD002, COVERED DEFENSE INFORMATION APPLIES � � �REFERENCE NUMBER CA060 � � �NO DATA IS AVAILABLE. �THE ALTERNATE OFFEROR IS � � �REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE � � �INCLUDING DATA FOR THE APPROVED AND ALTERNATE � � �PART FOR EVALUATION. � � �REFERENCE NUMBER CS187 � � �CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE � � �USED NOR INCORPORATED IN ANY ITEMS TO BE � � �DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION � � �SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT � � �DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. � � �SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR � � �APPROVAL UNLESS THEY ARE AUTHORIZED BY THE � � �SPECIFICATION REQUIREMENTS. � � �REFERENCE NUMBER RQ002 � � �RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) � � �REFERENCE NUMBER CS241 � � �NOTE: THIS IS A RESTRICTED SOURCE ITEM AND � � �REQUIRES ENGINEERING SOURCE APPROVAL BY THE � � �GOVERNMENT DESIGN CONTROL ACTIVITY. � � �REFERENCE NUMBER ZQA06 � � �THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY � � �ITEM (CSI). � � �. � � �ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE � � �FORWARDED TO THE DSC CONTRACTING OFFICER � � �FOR REVIEW AND APPROVAL. � � �. � � �ALL ITEMS OF SUPPLY SHALL BE MARKED IAW � � �MIL-STD-129. �IN ADDITION, EACH UNIT PACK WILL � � �BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), � � �CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S � � �CAGE CODE AND PART NUMBER. � � �REFERENCE NUMBER ZD037 � � �COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN � � �ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W � � �MIL-STD-129. � � �PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT � � �TO PREVENT DAMAGE TO CONTENTS OF KIT. �IF ONE BOX IS INSUFFICENT, ENSURE � � �THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT � � �(THAT IS, 1 OF 2, 2 OF 2, ETC.) � � �CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE � � �OF CONTENTS. �EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS � � �WITHIN THE KIT. � � �REFERENCE NUMBER CS284 � � �EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, � � �CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE � � �CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/40e5ee46a23440ca9e95eb463ae3f71b/view)
- Place of Performance
- Address: Columbus, OH 43213, USA
- Zip Code: 43213
- Country: USA
- Zip Code: 43213
- Record
- SN06238397-F 20220211/220209230126 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |