MODIFICATION
20 -- Marine Fenders
- Notice Date
- 1/11/2005
- Notice Type
- Modification
- Contracting Office
- N00604 1942 Gaffney Street, Ste 100 Bldg. 475-2, Code 200 Pearl Harbor, HI
- ZIP Code
- 00000
- Solicitation Number
- N0060405T0170
- Response Due
- 1/27/2005
- Point of Contact
- JEANNETTE GIBBS 808-473-7582
- Description
- This synopsis solicitation is modified to add the additional information. The following publications are applicable to this requirement. ASTM A 123, 1989, Rev A; ASTM A 153 and A 153 M dated 1995; ASTM D 412 dated 1997; ASTM D 470 dated 1993; ASTM D 1052 dated 1985 R 1994; ASTM D 1630 dated 1994; ASTM D 1667 dated 1976 R 1990; ASTM D 2240 dated 1997; ASTM D 3575; and AWS D1.1 D1.1M. The intent of this fender is that it will be mounted to the wharf and pier at Pearl Harbor. The resilient, foam filled marine fender shall be designed so that when compressed across its diameter by two flat plates extending the full length and width of the fender, the fender shall absorb 1,250,000 foot-pounds of energy +-15 percent when 60 percent compressed with a corresponding load of not more than 460,000 pounds +-15 percent. The fender shall withstand a sustained reaction force of 400,000 pounds for duration of not less than 24 hours each occurrence for at least 200 occurrences during a! 10-year life. The skin of the fender shall have a smooth surface free of cracks, burrs, warpage, checks, chipped or blistered surfaces. The steel used in the fabrication shall be free from kinks, sharp bends and other conditions, which would be detrimental to the finished product. The foam core shall be homogenous and of one-piece fabricated construction. The fender size is 10 feet x 18 feet with a diameter of 120 inches. The end shackle will be 2 inches and the length eye to eye will be 126 inches. Skin thickness is 1.5 inches, fender safe working load will be 31.7 tons. Energy absorption FT-KIPS at or before 60 percent compression will be 31.7. The reaction force KIPS at predicted energy attainment will be 1258. The internal chain will be 1.75 inches and the external chain will be 15 feet on each side of the fender for a total of 30 feet. A warranty of 10 years or more is required. A certification from the vendor is required that states all fenders meet the above criteria! .
- Web Link
-
Marine Fenders
(http://)
- Record
- SN00733173-W 20050113/050111212022 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |